I will try to answer.The ESP32-CAM development board is another member of the ESP32 module family. I am not an esp32 pro or anything having spent 6 days trying to upload code but it was worth the time.Īny questions feel free to tell me in the comments. I hope this inspires new projects with the esp32 cam and let me know what they are, how they work, etc. You are good to go for any other projects!! Here you can adjust settings, etc to get best quality. In the bottom of the website there will be a Start Stream button and click on that. Then you should see a link(which is your IP address) and go to the address. Then open the Serial Monitor and click the reset button. Wait for some time and if it shows somthing like: Ĭhange ssid to your wifi name and password to your wifi password.

My model is AI thinker so comment everything and uncomment #define CAMERA_MODEL_AI_THINKER. #define CAMERA_MODEL_TTGO_T_JOURNAL // No PSRAM

#define CAMERA_MODEL_AI_THINKER // Has PSRAM #define CAMERA_MODEL_M5STACK_ESP32CAM // No PSRAM #define CAMERA_MODEL_M5STACK_WIDE // Has PSRAM #define CAMERA_MODEL_M5STACK_V2_PSRAM // M5Camera version B Has PSRAM

#define CAMERA_MODEL_M5STACK_PSRAM // Has PSRAM #define CAMERA_MODEL_ESP_EYE // Has PSRAM #define CAMERA_MODEL_WROVER_KIT // Has PSRAM Go to tools and set the following as shown Repeat the process until you get a small duration flash. If you see a bright flash for a few millisecond and then off you are good to go.if not leave the reset button and unplug it and re-plug it again with the GPIO0 to GND button pressed. Press the GPIO0 to GND button and power the esp32 cam. The sketch we will be using is the CameraWebServer sketch which is located in the File -> Examples -> esp32 -> camera -> CameraWebServer or similar.

Download free esp32 cam pinout